In-building Ceiling Mount Dome Antenna (N-Female connector)

$ 0.94 USD

  • Receives 3G, 4G LTE Signals (all U.S. and Canada Wireless Carriers)
  • N-Female connector
  • For use with Cellular Signal Boosters

Out of stock

SKU: 83617 Categories: , Tags: ,

Works with All U.S. and Canada wireless carriers


3G/4G LTE In-building Dome Antenna, white, omni-directional, ceiling mount, N-Female connector.

  • Indoor Antenna that can be used with any cellular booster (make sure the connectors will match).
  • Connector type: N-Female. Please verify that your booster uses an N Male connector or buy an adapter.


Electrical Specifications

Frequency Range 698~960/1710~2700MHz
Gain 5dBi
V.S.W.R ≤2.0
Radiation Omni-Directional
Polarization Vertical
Lightning Protection DC-Grounded
Maximum Input Power 50W
Impedance 50Ω
Connector N(Female)
Cable Type RG58U
Antenna Radome Material ABS
Mount way ABS

Mechanical Specifications

Dimensions Ø187 x 85 mm
Weight 0.215KG
Operating Temperature -40℃ ~ +70℃
RoHS Compliant YES


There are no reviews yet.

Be the first to review “In-building Ceiling Mount Dome Antenna (N-Female connector)”

Your email address will not be published. Required fields are marked *

Q. What is the cellular signal booster?
A. The cellular signal booster is a product that boosts your cell phone reception and data service.

Q. Why need to use a cellular signal booster?
A. Cellular signals may not be sufficient if your cellular is located far away from the cell.

Q. Do I need an internet connection to use a cellular signal booster?
A. Cell phone signal booster doesn’t need to connect the internet.

Q. Do I have to pay a monthly fee to use the cellular signal booster?
A. You don’t need to pay a monthly fee.

Q. Where is the best position to install the outside antenna?
A. Best position is the roof of a building or house without any obstructions. If it can not be installed outside, it is recommended to be as close as the outside as possible.

Q. Even after installing the booster, the cellular reception is still weak. What Can I do?
A. Check the power source is connected to the booster. Make sure the outside antenna and inside antenna is sufficiently separated.